DD-NET35PR - Netafim PRV075HF35V2K - Pressure Regulator 35 PSI - Pipe Threaded 3/4" FPT Inlet x 3/4" MPT Outlet 4.5-17.6 GPM

Product Description

A pressure regulator reduces household water pressure to a set pressure for use with a drip system. Always install a regulator after a valve and filter. They are not designed to be operated under constant pressure. Learn how to choose a drip regulator.

NOTE: If incoming water pressure is over 80 PSI, we recommend installing a regulator designed for high-pressure domestic water supply to reduce household pressure below 80 PSI. Consult a plumber or Irrigation Contractor.

Product Details

• 35 PSI Pre-set Pressure Regulator (20 PSI pipe-thread regulator also available)
• Drip Irrigation Pressure Regulator
• Inlet: 3/4" FPT (Female Pipe Thread)
• Outlet: 3/4" MPT (Male Pipe Thread)
• Flow Rate Range (High Flow):  4-17 GPM (Gallons Per Minute)
• Maximum Operating Inlet Pressure: 80 PSI
• Heavy Duty ABS Plastic with Maximum UV & Oxidizer Protection
• Recommended to be installed after a filter
• Pipe threads require teflon tape
• Regulator is not designed to be under static (constant) pressure
• Regulator will only reduce pressure under flow

For A Tutorial on How To Choose A Pressure Regulator click here