RB 100-PGA - 1" Rain Bird Light Commercial Sprinkler Irrigation Valve (K1C2)

Specs:

Pressure: 15 to 150 psi

Flow: 2 to 150 gpm

Water temperature: Up to 110° F (43° C)

Ambient temperature: Up to 125° F (52° C)

Solenoid: 24VAC 50/60Hz (cycles/sec)

Reliability

Water-tight seal between the body and bonnet for maximum confidence, even in the most extreme conditions.
Robust electrical design for quiet performance you can count on.
Rugged PVC and glass-filled nylon construction for reliable operation.
Normally closed, forward flow design.
Filtered pilot flow to resist debris and clogging.
Slow closing to prevent water hammer and subsequent system damage.
Three-year trade warranty.

Ease of Use

Multi-drive screws (Phillips, flathead, hexagonal) for easy maintenance.*
Globe and angle configuration for flexibility in design and installation.
Manual internal bleed operates the valve without allowing water into the valve box. This allows the pressure regulator to be adjusted without turning the valve on at the controller.
One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service.
Non-rising flow control handle adjusts water flow as needed.

*Currently available on 2” PGA models only.

Versatility

Accommodates optional, field-installed PRS-D pressure regulating dial to ensure optimum sprinkler performance.
Accepts latching solenoid for use with Rain Bird battery-operated controllers.
Optional purple flow control handle for non-potable water applications PGA-NP-HAN1 (1" and 1 1/2"); PGA-NP-HAN2 (2").

Rainbird P

N: 100PGA or B30310