DD-ILE5 - 1/2 GPH Mini In-Line Drippers Non Pressure Compensating Drip Emitter (C1E7)

Details


SKU	DD-ILE5
Our Price:	$CAD0.59

Description

Product Description

Mini In-Line Drippers are inserted into 1/4" tubing. They are installed like a 1/4" coupler. In-line drippers can be installed with the outlet hole on either the upstream or downstream side of the tubing.

Make your own 1/4" emitter tubing. You to control the spacing. Cap the end of the 1/4" tubing with a goof plug.
Add a little more water where needed. Cut the 1/4" tubing and insert the emitter into each end.

Product Details

Recommended Operating Pressure: 15 - 20 PSI to maintain 1/2 GPH (gallons per hour) output. See flow rate chart below.
In-line drippers can be installed with the outlet hole on either the upstream or downstream side of the tubing.
Non-Pressure Compensating Emitter. Water output will increase over 20 PSI.
1/4" Barb Inlet and Outlet, use with our 1/4" tubing
Used to make custom-spaced 1/4" drip emitter tubing
Excellent for unevenly spaced plants
Maximum Flow with 1/4" tubing: 30 GPH (60 emitters) per circuit
Maximum Run for 1/4" tubing: 50 feet per circuit
20 PSI Pressure Regulator required to achieve proper flow rate. Hose Threaded 20 psi Regulators & Pipe Threaded 20 psi Regulators available
Cap end of 1/4" tubing with Goof Plug

Flow rate in gallon per hour @ 5 to 30 PSI

COLOR	RED	BLACK
Nominal Flow rate	.5 GPH	1 GPH
5 PSI	.23	.57
10 PSI	.34	.81
15 PSI	.42	.98
20 PSI	.5	1.15
25 PSI	.56	1.21
30 PSI	.62	1.41

DIG 06-036