Kit Contents
Photo | Code | Description | Quantity |
|
| Water Source Connections |
|
| Vacuum Breaker 3/4" Hose Thead Anti Siphon Backflow Preventer for Drip Irrigation. | 1 | |
| Y Filter 3/4" Female Hose Swivel x Male Hose 200 Mesh Stainless Steel Screen | 1 | |
Pressure Regulator 25 PSI - Hose Threaded 3/4" FHT x 3/4" MHT - High Quality Model | 1 | ||
3/4" Hose Thread Swivel x .700 OD Compression Adapter - Black Ring | 1 | ||
|
| Drip Assemblies |
|
|
| 24” Drip Assembly with choice of output | 32 |
|
| Tubing and Accessories |
|
| Drip Irrigation 1/2" x 50' .700 OD Poly Drip Tubing - 50' Roll | 1 | |
|
| 1/2" Perma Loc Tee .700 OD - Black Rings. | 1 |
|
| 1/2" Perma Loc Elbow . | 3 |
|
| 1/2" Flow Control Valve . | 1 |
|
| 1/2" Compression Hose End Plug .700 OD with 3/4" Cap - Black Ring. | 2 |
|
| Hole Punch for 1/4" Barbed Fittings & Drippers | 1 |
|
| 1/2" Tubing Mounting Clamp with Nail - Black | 5 |
The next step to a successful set up is laying out your 1/2” Distribution Line. Below is a sample layout.
Once the Distribution Lines are in place you are now ready to install the Drip Assemblies. We do recommend that you layout your growing pots prior to this step to ensure proper placement of the assemblies.
Please note. Depending on your growing preference you may want to use 1, 2, 3, or 4 assemblies per plant so plan your Dripper Assembly placement accordingly.
Steps to Installing Dripper Assemblies
Step 1: Punch Hole with Punch Tool
Step 2: Insert Assembly
Step 3: Place Assembly Stake Into Plant
Ref 5010