Sprinkler Conversion Kit - Not Assembled

Details


SKU	Sprinkler Conversion Kit
Our Price:	$CAD61.50

Description

This KIT is NOT Assembled

Converts your pre-existing system of 1/2" Pop-Up Spray Heads or 3/4" Rotors into an operational drip irrigation system. Simply remove the spray body off of the riser, and replace it with this conversion kit. The kit comes with a filter, a pressure regulator, an anti-siphoning vacuum breaker and choice of two attachments that allow you to connect to standard 1/2" or 3/4" poly tubing or directly into 17mm Drip Emitter Tubing. See pictures below for the two setups.

Part	Quantity	Item	SKU
	1	Schedule 40 PVC Threaded Reducing Bushing MIPT x FIPT 3/4" x 1/2"	439-101
	1	3/4" Coupling Fipt x Fipt Sch 40 Fitting	430-007
	1	3/4" x 6" Poly Cut-Off Nipple Fitting	DCOR7560
	1	3/4" Elbow 90° Fipt x Fipt Sch 40 PVC Fitting White	408-007
	1	3/4" Male Hose Thread x 3/4" Male Pipe Thread Adapter	DD-MH6
	1	Y Filter 3/4" Female Hose Swivel x Male Hose 150 Stainless Steel Mesh Screen	A4-HTF155
	1	Pressure Regulator 25 PSI - Hose Threaded 3/4" FHT x 3/4" MHT - High Quality Model	DD-HPR25-HQ
	1	Drip Irrigation Direct-Loc Swivel Adapter .600 ID DL x 3/4" FHT Swivel - 700 or 710 Tubing.	DL-FHS600
	1	3/4" Direct-Loc Swivel Adapter .820 ID DL x 3/4" FHT Swivel	A1-H8S
	1	Standard Grade Teflon Tape	TEFL-STD
	1	3/4" Female Hose Thread x 3/4" Female Pipe Thread Swivel Adapter	PHA-75
	1	17mm 3/4" MPT Male Threaded Adaptor	T17075MA

The 3/4" Coupling (430-007) replaces your sprinkler head on the threaded connection.

NOTE: For spray heads, you would need to use the 439-101 reducer to thread onto the 1/2" MPT connection from your sprinkler plumbing.

Sprinkler Conversion to Techline 17mm Drip Emitter Tubing

Sprinkler Conversion to 1/2" or 3/4" Poly Tubing