1/2" 700 OD 600 ID Blank Drip Tubing

1/2" 700 OD 600 ID Blank Drip Tubing


1/2" 700 OD 600 ID Blank Drip Tubing

Our 1/2" Blank Drip Line is .700 OD .600 ID. is available in 50, 100, 500, and 1,000 ft lengths.  Blank Drip Tubing is commonly used for drip line runs where spacing is either to be determined or at spacing where Drip Line (Emitter Tubing) is not available.  Emitters can be punched directly into this tubing.  This tubing is available in both Black and White.  

Fittings available for this tubing 600 Series Perma-Loc and 700 Series Compression Fittings.

Click Here To See Maximum Run Lengths for 700/600 Tubing When Using Emitters.


Products


DD-DH700-100 - Drip Irrigation 1/2" x 100' .700 OD Poly Tubing - 100' Roll (L1A1)

For main and lateral lines of a drip irrigation system. The maximum distance that you can run drip tubing will vary with the number of emitters you install and the spacing between emitters. (.600" ID x .700" OD)

For best results use Perma-Loc fittings or Compression fittings with this tubing.

 

 

DD-DH700-100

$CAD28.50

DD-DH700-500 - 1/2" x 500' .700 OD Poly Tubing - 500' Roll

700 x 500' (.600" ID x .700" OD) Polyethylene Solid Mainline Tubing 500' Roll. 

For best results use Perma-Loc fittings or Compression fittings with this tubing.

PLEASE NOTE: MULIPLE ORDERS OF 500 FT ROLLS WILL BE SHIPPED AS 1,000 FT ROLLS WHERE POSSIBLE.

DD-DH700-500

$CAD109.50

PE060070-05W - 1/2" x 500' .700 OD Poly Tubing - White

700 x 500' (.600" ID x .700" OD) Polyethylene Solid Mainline Tubing 500' Roll White.

For best results use Perma-Loc fittings or Compression fittings with this tubing.

PE060070-05W

$CAD135.00