Drip Tape Fittings

https://www.irrigationdirect.ca/DD-HP250-DG-Deluxe-Hole-Punch-for-1-4-Barbed-Fittings-and-Drippers..htmlFor watering row crops & vegetable gardens. Connects 5/8" drip tape (16 mm) to 1/2" or 3/4" solid drip poly tubing. 1/4" barb is inserted into poly tubing. Perfect for setting up small to medium sized vegetable garden watering systems.

For watering row crops & vegetable gardens. Flow Control Valve connects 5/8" drip tape (16 mm) to  solid drip poly tubing. .25" barb is inserted into poly tubing. Use hole punch.

DD-HP250

For watering row crops & vegetable gardens. Flow Control Valve connects 5/8" drip tape (16 mm) to 3/4" or 1" solid drip poly tubing (can't be used with 1/2" Solid Tubing). .400" barb is inserted into poly tubing. Use hole punch.

Irritec PN# A2-TV5B400

For watering row crops & vegetable gardens. Drip Tape Sleeve End caps off 5/8" Drip Tape (16 mm). Insert Drip Tape into the narrow end, fold over two or three times, pull back to lock it in place.
 

For watering row crops & vegetable gardens. Connects 5/8" drip tape (16 mm) to 3/4" drip poly tubing (or larger). Large .400 barb allows for greater water flow and longer runs of drip tape.
 

5/8" Drip Tape End Cap with removable cap.

Connects lengths of 5/8" drip tape (16 mm). Drip Tape Loc fittings twist onto drip tape and are reusable. Works with T-Tape, Aqua Traxx, and Chapin Drip Tape Systems for watering row crops & vegetable gardens.

For watering row crops & vegetable gardens. Drip Tape Loc Elbows make 90 degree turns in 5/8" Drip Tape (16 mm). Drip tape may kink if you try to make a tight turn without an elbow. Drip Tape Loc fittings twist onto drip tape and are reusable. They fit both 8 Mil Drip Tape & 15 Mil Drip Tape. Works with T-Tape, Aqua Traxx, and Chapin Drip Tape Systems.

Drip Tape 5/8" Loc x Male Hose Thread

5/8 Drip Tape T Fitting

Connects Drip Tape/T-Tape to standard hose faucet.

400 Series Goof Plug.

Irritec A4-HTF200 Y Filter 3/4" Female Hose Thread x 3/4" Male Hose Thread w/ 200 Stainless Steel Mesh Filter

Drip Irrigation Pressure Regulator - 10 psi 3/4" FHT x MHT Low Flow .1 - 8 gpm. This regulator is recommended for Drip Tape applications.

Air Release & Vacuum Relief Valves are installed on the highest point of a drip irrigation or drip tape watering system to minimize the collapse of mainline and submain pipes, and reduce back siphonage of dirt into drip emitters and drip tape.

Air Release / Vacuum Relief Valves are installed on the highest point of a drip irrigation or drip tape watering system to minimize the collapse of mainline and submain pipes, and reduce back siphonage.

ARV-50 - 1/2" MPT Air Relief Valve