DIG TOP 12 Port Manifold

The DIG TOP 12 outlet manifold with pressure compensating emitters at .6 gph each, provides the precision necessary for Cannabis Irrigation while also eliminating the need for individual emitters for every plant.  The self cleaning features for every emitter enable longer run times without cleaning, while maintanence effortless with the easy removal of the manifold cap. 

Note: TOP Manifolds must be used with 1/8" tubing with .125" (3.175mm) ID x .187" (4.75mm) OD. 

Available in .6, 1, 2.2, and 3.3 gph outlets.  

SKU TOP-005

The DIG TOP 12 outlet manifold with pressure compensating emitters at 1 gph each,  provides the precision necessary for Cannabis Irrigation while also eliminating the need for individual emitters for every plant.  The self cleaning features for every emitter enable longer run times without cleaning, while maintanence effortless with the easy removal of the manifold cap. 

Note: TOP Manifolds must be used with 1/8" tubing with .125" (3.175mm) ID x .187" (4.75mm) OD. 

Available in .6, 1, 2.2, and 3.3 gph outlets.  

SKU TOP-010

The DIG TOP 12 outlet manifold with pressure compensating emitters at 2.2 gph each, provides the precision necessary for Cannabis Irrigation while also eliminating the need for individual emitters for every plant.  The self cleaning features for every emitter enable longer run times without cleaning, while maintanence effortless with the easy removal of the manifold cap. 

Note: TOP Manifolds must be used with 1/8" tubing with .125" (3.175mm) ID x .187" (4.75mm) OD. 

Available in .6, 1, 2.2, and 3.3 gph outlets.  

SKU TOP-020

The DIG TOP 12 outlet manifold with pressure compensating emitters at 3.3 gph each, provides the precision necessary for Cannabis Irrigation while also eliminating the need for individual emitters for every plant.  The self cleaning features for every emitter enable longer run times without cleaning, while maintanence effortless with the easy removal of the manifold cap. 

Note: TOP Manifolds must be used with 1/8" tubing with .125" (3.175mm) ID x .187" (4.75mm) OD.

Available in .6, 1, 2.2, and 3.3 gph outlets.

SKU TOP-030 

The DIG TOP-000 12 outlet manifold does not come with emitters and is an open flow product.  

Note: TOP Manifolds must be used with 1/8" tubing with .125" (3.175mm) ID x .187" (4.75mm) OD. 

Available in .6, 1, 2.2, and 3.3 gph outlets.

SKU TOP-000 

Specifically for use with DIG TOP manifolds, but can also be used for Single Emitter Assemblies.  We often recommend 2 drip stakes per Marijuana plant to ensure adaquate saturation of water and nutrients.  Simply plug the assemly into your Drip Manifold and watch your Cannabis grow.

This assembly is not intended for use with Netafim Stackable Drip Manifolds.  

18" DIG 12-075 Tubing combined with a Irritec Barbed Drip Stake. 

Specifically for use with DIG TOP manifolds, but can also be used for Single Emitter Assemblies.  We often recommend 2 drip stakes per Marijuana plant to ensure adaquate saturation of water and nutrients.  Simply plug the assemly into your Drip Manifold and watch your Cannabis grow.

This assembly is not intended for use with Netafim Stackable Drip Manifolds.  

24" DIG 12-075 Tubing combined with a DIG 16-017 Drip Stake. 

Specifically for use with DIG TOP manifolds, but can also be used for Single Emitter Assemblies.  We often recommend 2 drip stakes per Marijuana plant to ensure adaquate saturation of water and nutrients.  Simply plug the assemly into your Drip Manifold and watch your Cannabis grow.

This assembly is not intended for use with Netafim Stackable Drip Manifolds.  

30" DIG 12-075 Tubing combined with a DIG 16-017 Drip Stake. 

Specifically for use with DIG TOP manifolds, but can also be used for Single Emitter Assemblies.  We often recommend 2 drip stakes per Marijuana plant to ensure adequate saturation of water and nutrients.  Simply plug the assemly into your Drip Manifold and watch your Cannabis grow.

This assembly is not intended for use with Netafim Stackable Drip Manifolds.  

36" 1/8" Tubing combined with a DIG 16-017 Drip Stake. 

Specifically for use with DIG TOP manifolds, but can also be used for Single Emitter Assemblies.  We often recommend 2 drip stakes per Marijuana plant to ensure adaquate saturation of water and nutrients.  Simply plug the assemly into your Drip Manifold and watch your Cannabis grow.

This assembly is not intended for use with Netafim Stackable Drip Manifolds.  

48" DIG 12-075 Tubing combined with a DIG 16-017 Drip Stake. 

The 16-017 Drip Stake barbed stake is most commonly used for dripper assemblies and manifolds commonly used in Drip Irrigation Systems.  

DIG 1/8" Micro Tubing can be used for Manifold Assemblies using either Barbed or Labyrynth dripper stakes. .125 ID X .187 OD

500 ft roll.

DIG 1/8" Micro Tubing can be used for Manifold Assemblies using either Barbed or Labyrynth dripper stakes. .125 ID X .187 OD

1000 ft roll.

DIG 1/8" Micro Tubing can be used for Manifold Assemblies using either Barbed or Labyrynth dripper stakes. .125 ID X .187 OD

100 ft roll.

Replacement Pressure Compensating Emitter for DIG TOP Manifold assemblies.  Precision output for Cannabis growers. 

2.2 GPH Package of 12

SKU DIG 10-021

Replacement Pressure Compensating Emitter for DIG TOP Manifold assemblies.  Precision output for Cannabis growers. 

Package of 12 - 3.3 GPH Replacement Emitters

SKU DIG TOP 10-022

Replacement Pressure Compensating Emitter for DIG TOP Manifold assemblies.  Precision output for Cannabis growers. 

Package of 12 - .6 GPH Replacement Emitters

SKU DIG 10-019

Replacement Pressure Compensating Emitter for DIG TOP Manifold assemblies.  Precision output for Cannabis growers. 

Package of 12 - 1 GPH Replacement Emitters

SKU DIG 10-020

25-007 Converter Barb can be inserted into the outlets of rhe DIG TOP Manifold to create a 1/4" outlet.

Port Cap for unused emitter ports on the Maverick 12-Outlet Drip Manifold - Strip of 8

10-003-mini-disk-filter-for-dig-top-manifolds