1/4" Soaker Hose Fittings
DD-C250 - Drip Irrigation 1/4" Barbed Connector. (B2D6)
Direct Drip 1/4" (250) Connector Barb X Barb. This is one of the common fittings found in drip irrigation. This fitting is often punched through a solid drip line to create a connection for 1/4" micro tubing.
DD-L250 - 1/4" Barbed Elbow. (B2D7)
Direct Drip 1/4" (250) Elbow Barb x Barb. Turn corners on your Drip System easily with 1/4" barbed fittings.
DD-T250 - Barbed Tee. (B2D8)
Direct Drip 1/4" (250) Tee Barb x Barb x Barb. A Tee Barbed Fitting can be punched into a 1/2" or 3/4" Solid Drip Hose and will create an outlet for 2 seperate 1/4" drip lines. Emitters can then be attached to both ends of the 1/4" tubing.
DD-FCV250 - 1/4" Barbed In-line Flow Control Valve. (B2D4)
Direct Drip 1/4" (250) Flow Control Valve Barb x Barb. Used the FCV250 to shut off flow to no longer used Emitters in a Drip Irrigation System
DD-GP - Goof Plug - Dual End 1/4" & 1/8". (B2D5)
Direct Drip Dual End Goof Plug. NOTE: Always purchase Goof Plugs for your Dirp Irrigation System. Goof Plugs are used for correcting mistakes when installing a Drip System. They are also helpful when Drip Irrigation components need to be re-located for changes in plant locations. Goof Plugs can also be used to plug the end of a 1/4" drip hose.
SAH - 3/4" Female Hose Thread x 1/4" Drip Lock (C2E4)
Used to connect common hose thread items to 1/4" Drip Tubing.
Adapts 1/4" drip line to a hose faucet or garden hose.