Hose Thread Water Source Connections

Direct Drip Hose Vacuum Breaker 3/4" FHT x 3/4" MHT w/ Hose Filter

A4-HTTF150 - The Mini T Filter from Irritec is designed for small to medium sized Drip Irrigation Systems and is great for tight spaces or low lying faucets where water source connections can't be installed vertically.  Comes with flush cap.

Drip Irrigation Y Filter Hose Threaded 3/4" FHT x 3/4" Male Hose Thread w/ 150 Stainless Steel Mesh Filter.   This is a great filter for small to medium sized Drip Irrigation systems.  The mesh filter can be easily removed for cleaning and or replacement.

Irritec A4-HTF200 Y Filter 3/4" Female Hose Thread x 3/4" Male Hose Thread w/ 200 Stainless Steel Mesh Filter

Irritec A4-SS200 Mesh - Drip Irrigation Filters need to be inspected on a regular basis to ensure your system components perform as they were designed.  Filters can be cleaned but will need occasional replacement depending on water quality in the system.  Replacement Filter 200 Stainless Steel mesh for 3/4" Irritec Filters.

Drip Irrigation Pressure Regulator - 10 psi 3/4" FHT x MHT Low Flow .1 - 8 gpm. This regulator is recommended for Drip Tape applications.

Drip Irrigation Hose thread Pressure Regulator. Reduce household water pressure to a set pressure for use with a drip system. For Flow rates from .1 to 8 GPM (gallons per minute)

Drip Irrigation Hose thread Pressure Regulator. Reduce household water pressure to a set pressure for use with a drip system. For flow rates from 1/3 to 12 GPM (gallons per minute)

Hendrickson Bros. Model PR55-35-1

Drip Irrigation Hose thread Pressure Gauge.

The PR8000 PRESET PRESSURE REGULATOR is a high flow regulator that has a range of 1 to 35 gpm. This regulator has been designed to convert high pressure to the desired pressure.

Hendrickson Bros. Model PR8040

Direct Drip 3/4" Hose Filter 60 Mesh Screen