Adaptors and Fittings
Adaptor fittings are commonly used for installing Irrigation systems when there is a need to convert from Pipe Thread to Hose Thread Fittings.
DD-FH4 - 3/4" Female Hose Swivel x 3/4" Male Pipe Thread Adapter
This swivel fitting attaches to a hose bibb, faucet, spigot, hydrant, garden hose or hose threaded parts (like drip filters and regulators) and accepts fittings with 3/4" female pipe threads.
DD-MH6 - 3/4" Male Hose Thread x 3/4" Male Pipe Thread Adapter
DD-RA250B 1/2" PT x 1/4" Riser Adapter
Riser adapter converts a 1/2” riser with sprinkler head to a drip system with inlet for 1/4” barbed fittings or micro sprayers.
DD-RA250E-1/2" PT x 1/4" Elbow Riser Adapter
Riser adapter converts 1/2" riser with sprinkler to a drip system. Allows 1/4" micro tubing to be installed just below sprinkler nozzle. A convenient and easy way to add drip components to an existing sprinkler system
DIG 28-004 3/4" FPT x 3/4" MPT Shut Off Valve
The DIG mainline shut-off valve is used for control of individual driplines and laterals. The shut-off valve fits 3/4" pipe threads, and features a large handle for easy manual control.
NDS PHA75 - 3/4" Female Hose Thread x 3/4" Female Pipe Thread Swivel Adapter
NDS PHA75 3/4" Female Hose Thread x 3/4" Female Pipe Thread Adapter for Drip Irrigation Applications.
DD-F8 - Figure 8 End of Line Plug.
Direct Drip Figure 8 End Plug - 700 Tubing. For capping the end of Solid Drip Line or Drip Emitter Tubing. Simply slip one end into the figure 8 fold the tubing over and secure with the other side of the figure 8. This is an inexpensive method of capping 1/2" Drip Hose.