Gravity Feed Drip Irrigation Kit for Clean Water - System Layouts
| System Layouts Here are a few sample layouts for our gravity feed kits. Use the tips below in your design to help equalize the output of the drip emitters. Starter Kit Connection Options
Medium Kit Connection Options
Large Kit Connection Options Large Kit Tip: Close off the ends and attach mainline to center
6. Add Direct-Loc Threaded End Caps (DL-EC600) to the ends of 1/2” drip tubing. Leave the caps off for flushing.
7. Open the Flow Control Valve to turn on the water and FLUSH THE LINE until all lines are clear of debris. Replace the 1/2” threaded end caps at the ends of the 1/2” drip tubing.
Ref 6040 |
