Multi Level Cannabis Irrigation Assembly

FREE SHIPPING
ON ORDERS OVER $175

 @irrigationdirectcanada
  0  
  2. Multi Level Cannabis Irrigation Assembly

Multi Level Cannabis Irrigation Assembly

Multi-Level Cannabis Drip Irrigation Systems

There isn't too much difference between a single level system and a multi-level system other than haveing to run a line each level.  We highly recommend have a shut off for each level, as well as a shut off for the each table set.

For our examples we will assume the room is being supplied with a 1" Schedule 40 PVC Header Line.  

Below we have illustrated a 4 level sample using 1/2" Solid Drip Tubing.  

1

Hookup from 1" PVC to Flexline.  We offer flexline in both 3/4" and 1" models. Example shown using 3/4" Yellow Flexline.

  • 402-131       - 1" Slip x FPT Tee Fitting
  • 883-020       - 2" x 3/4" Threaded Nipple
  • 0921-07       - FPT x FPT 3/4" Ball Valve
  • A4-75S155  - Screen Filter for additional Filtration
  • 1435-007     - 3/4" Female x Insert Fitting
  • #12 SSGC   - #12 Gear Clamp
  • Yelflex-100   - Yellow Flex Tubing (sold in 100 ft. rolls and per ft.)
2

Flexline to Table Hookup Assembly. This Product Sequence provides a manual shot off for the table and a screen filter for additional filtration.  The PHA75 swivel adapter allows for easy removal of the table for mobility.

  • 1436-007      - MPT x Insert Fitting
  • 0921-07        - FPT x FPT 3/4" Ball Valve
  • 883-020        - 2" x 3/4" Threaded Nipple
  • NDS PAH75  - 3/4" Female Hose x 3/4" Female Pipe Thread Adapter
  • 883-020       - 2" x 3/4" Threaded Nipple
  • 405-007        - 3/4" FPT Threaded Tee
3

Perma Loc Fittings for 1/2" Poly Tubing.  

  • DL-FCV75MP600  - 3/4" MPT x 1/2" Perma-Loc Fitting Flow Control Valve
  • DL-L600                 - 1/2" Perma-Loc Elbow
  • DL-T600                 - 1/2" Perma-Loc Tee
4

Drip or Spray Stake Assembly.  Depending on Flow Calculations and Size of Pot Being Used.
5

Pressure Gauge Assembly.  Usually placed on the furthest table from the water source, but can be installed on every table if desired.

  • DL-ST600       - Perma-Loc x 3/4" FHT Hose Thread
  • MEL 59Z MB    - 3/4" Hose Thread x 3/4" Hoset Thread Coupling
  • DG100CAP     - Pressure Gauge with 
6

End of Line Spring Loaded Flush Valve released water on pressure drop after every feeding.  Can be replaced with a standard End Cap if desired.
7

1/2" Bright White Solid Poly Drip Tubing
8

3/4" EbbFlow Drain Fitting.  Drain can be used in conjunction with 3/4" Yellow Flex Tubing for directional draining.  

 

 

Ref 10301