Small Individual Plant Kit - Waters up to 50 Plants

Product Description

This drip irrigation kit contains everything you will need to go from hose bibb (faucet) to your plants. Waters up to 50 plants. Take-Apart Flag Emitters attach directly to 1/2" solid tubing. The number of plants is an estimate based on each container receiving one drip emitter. Larger plants should get two drip emitters. If you want to automate your drip system, a Drip Water Timer can be purchased separately.

Maximum Flow Rate Required when kit is fully installed (all drippers): 50 gph

Included in the Kit:

	Qty	Item	Part #
	1	Vacuum Breaker 3/4" Hose Thread Anti-Siphon Backflow Preventer	DD-HVB
	1	Y Filter 3/4" Female Hose Swivel x Male Hose 155 Mesh Stainless Steel Screen	A4-HTF155
	1	Pressure Regulator 25 PSI - Hose Threaded 3/4" FHT x 3/4" MHT - High Quality Model	DD-HPR25-HQ
	1	Direct-Loc Swivel Adapter .600 ID DL x 3/4" FHT Swivel - 700 or 710 Tubing	DL-FHS600
	2	Direct-Loc Tee .600 ID - 700 or 710 Tubing	DL-T600
	1	Direct-Loc Coupling .600" ID - 700 or 710 Tubing	DL-C600
	1	Direct-Loc End Cap .600 ID DL x 3/4" MHT w/ Cap - 700 or 710 Tubing	DL-EC600
	5	Figure 8 End of Line Plug - 1/2" .620" .700" .710" Tubing	DD-F8
	1	1/2" x 100' .700 OD Poly Tubing - 100' Roll	DD-DH700-100
	1	Deluxe Hole Punch for 1/4" Barbed Fittings & Drippers	DD-HP250 DG
	1	1/4" x 50' Poly Micro Tubing (PE) - 50' Roll	DD-DH250-50
	50	1 GPH Non Pressure Compensating Take Apart Drip Flag Emitter - Flag Dripper	DD-TAE10
	10	Goof Plug - Dual End 1/4" & 1/8"	DD-GP
	20	Micro Tubing Holder Stake 6" - Multiple sizes .167" to .350" OD	DD-S2
	1	Drip Tubing Hold Down 6" Wire Stake fits 1/8" to 3/4" tubing - 25 Pack	TLS6

For instruction for installation click here